Cineversity

Rendering out a simple animation of a hand using sketch and toon. Im getting all of this random 1 pixel spots. Looked on another forum and they said it was most likely the mesh. Is there a way to fix this?
Thanks
Joel H.

Hi Joel H.,

Without a scene file it is difficult to say anything with certainty.

If you check off anything in the material under Attribute Manager>Lines>Types, check out what you get then, from there, switch one after the other back on. Then you know what part caused the “artifacts”. Please note that most check boxes are connected to more adjustments, below in the interface.

If the “artifacts” as well the lines you like to have share the same settings, you might consider to use “selections” to filter this problem.

If that isn’t working for any reasons I’m not aware off, please supply a scene with the problem. I’m happy to check this.

All the best

Sassi

Cool.  Ill try that out and see if I can fix it first before I send the file over. Thanks
Joel H.

You’re welcome Joel H.!
Good luck with the project.